2/29/2024 0 Comments Nat pmp upnp time capsule![]() ![]() Īlso i have found very useful program to check the double-Nat/Port-forwarding/Server issue, its the server program of (Air Video HD), any one can test connection by it. I have managed to disable the double NAT by choosing Bridge Mode instead-of PPPoE/PPPoA at the Modem and choose PPPoE (Wired) at gargoyle, then entered my username and password. TEST 8 - Get External IP Address - FAILEDīut i suspect the problem is that the program server is down and not only the UPNP. Is Time Capsule compatible with UPnP-IGD/NAT-PMP protocols Configuring a Seagate NAS for remote access and having problems with port forwarding. It does not seem to explicitly state that routers on both ends must support UPnP or NAT-PMP. TEST 7 - Adapter #0 - 192.168.0.30 - FAILED The Apple knowledge base article on setting up Back To My Mac lists an 'AirPort base station (AirPort Extreme, AirPort Express, or AirPort Time Capsule) or other Internet router that supports UPnP or NAT-PMP' as one of the requirements. TEST 6 - UPnP Framework Firewall Exception Check - PASSED TEST 5 - UPnPHost Service Automatic Check - FAILED ![]() TEST 4 - UPnPHost Service Running Check - FAILED TEST 3 - SSDP Service Automatic Check - FAILED TEST 2 - SSDP Service Running Check - PASSED TEST 1 - Operating System Support - PASSED I thought it did one release but some time later after the connection was no longer needed it broke again and the same PC could no longer create a new session. Īnd the only program i could find to check the first solution is this and showing the following : Sorry but Ive tried this with every release of plug-in, you will see in my config in the first post that NAT-PMP is disabled, and it makes no difference with it enabled or not. Should it work correctly now ? i think the DMZ at the modem for the Router ip will overpass the modem NAT and at the same time the security is not a problem as the Gargoyle router firewall is on ?Įdit Schwartz thanks for replaying, But the problem is that when I disable the NAT option at the ZTE modem/router all my internet connections are down, I think i need to do some port forward to the Gargoyle router but don't know how. *DMZ for a Single IP enabled (192.168.1.2) which is my Router IP I have the UPnP enabled at the Gargoyle router only now, should I enable it at the ZET modem also ? knowing that this modem has the firewall and the SPI firewall enabled with this warning (If You enabled SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side), I have two options for the UPnPĪuto-configured : (Activated/Deactivated) (by UPnP-enabled Application)ĮDIT According to your Answer and with some search, I have made these changes, want to check if they are correct : I am connecting using a Gargoyle router, and that router is connecting to the internet using ZET ZXV10 W300 modem. I want to enable the UPnP to make programs like Gameranger host some games without problems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |